Construction tools
Very broadly, the term ‘tools’ refers to instruments that are used by hand.
The term ‘equipment’ generally refers to a set of tools used for a single purpose. The term ‘plant’ generally refers to heavy machinery and equipment. At the smaller scale, there may be some overlap between what is considered to be plant, small plant, tools, small tools, light equipment or equipment.
Tools have been integral to the construction of buildings, from the earliest use of timber, bone, antler, stone and so on for cutting, scraping, chopping, hammering and moving, to the development of modern power tools enabling construction activities to be performed more quickly and accurately or with fewer people.
Tools might be:
- Hand tools, such as; screwdrivers, brushes, trowels, wrenches, knives, crimpers, clamps, and so on.
- Power tools, which may be powered by electricity, compressed air, liquid fuel, hydraulic power, or powder-actuated and might include; mixers, saws, cutters, drills, grinders, guns, breakers, and so on.
- Machine tools, used for shaping materials into components by cutting, boring, grinding, and so on.
Tools may by general tools such as shovels and hammers, or specialist tools such electrical tools or measuring devices. Some tools are multi-functional.
Construction tools are generally re-useable, and so as well as being purchased new, they may be purchased second hand or hired. However, the quality of a tool that has already been used may not be clear, and so they should only be obtained from reputable sources, and carefully inspected before use.
It is important that the correct tools are available to carry out the works, otherwise there may be delays, or attempts to carry out the works with an inappropriate tool which can cause damage, improper installation or safety issues. However, there can be a tendency to oversupply tools, or to obtain over-sized tools ‘just in case’ which can lead to similar problems.
It is important that workers are properly trained in the use of tools and that they are supplied with appropriate information for their safe operation along with any necessary personal protective equipment (PPE). PPE should not interfere with the proper use of the tool, for example, safety glasses fogging, or gloves making it difficult to operate controls.
The selection of tools, should consider their:
- Appropriateness for the job.
- Quality.
- Safety.
- Weight.
- Comfort of use (such as grip, balance, vibration and so on).
- Duration of use.
- Available space for use.
- Storage.
- Security.
- Insurance.
- Power and fuel requirements.
- Maintenance and breakdowns.
- Standards and regulations.
- Potential to cause nuisance such as noise, dust, vibrations and so on.
A proper inventory of tools should be maintained, including manufacturer details, instructions, parts requirements, and so on. Management processes should be put in place for safety, inspection (in particular, blades, electrical cords and connections), reporting and record keeping, maintenance (such as lubrication, sharpening and replacement of parts), repairs and cleanliness. Damaged tools should be clearly labelled so that they are not used.
Manufacturer’s instructions should always be followed in the operation of tools and site standards should be applied throughout the supply chain to all contractors, sub-contractors and suppliers.
NB: The term ‘tool’ might also be used more generally to refer to anything that assists with a process, such as a piece of software, guidance toolkits, appraisal tools, and so on.
The Chartered Institute of Procurement & Supply (CIPS) Glossary of procurement terms, defines tooling as: ‘Cutting tools, moulds, fixtures of accessories needed on a machine to manufacture a product.’
See also: Tool theft.
[edit] Related articles on Designing Buildings Wiki
- Bituminous mixing and laying plant.
- Compressed air plant.
- Concreting plant.
- Construction plant.
- Construction staples.
- Consumable.
- Earth-moving plant.
- Equipment supply.
- Excavating plant.
- How to manage construction plant.
- Ladder.
- Personal protective equipment.
- Plumb level.
- Rubble chute.
- Scaffolding.
- Surveying instruments.
- Tool and equipment care and maintenance.
- Tool theft.
- Types of bolts.
- Types of crane.
- Types of nails.
- Types of nuts.
- Types of screws.
- Vesting certificate for construction goods plant or materials.
- Wall plug.
Featured articles and news
Reasons for using MVHR systems
6 reasons for a whole-house approach to ventilation.
Supplementary Planning Documents, a reminder
As used by the City of London to introduce a Retrofit first policy.
The what, how, why and when of deposit return schemes
Circular economy steps for plastic bottles and cans in England and Northern Ireland draws.
Join forces and share Building Safety knowledge in 2025
Why and how to contribute to the Building Safety Wiki.
Reporting on Payment Practices and Performance Regs
Approved amendment coming into effect 1 March 2025.
A new CIOB TIS on discharging CDM 2015 duties
Practical steps that can be undertaken in the Management of Contractors to discharge the relevant CDM 2015 duties.
Planning for homes by transport hubs
Next steps for infrastructure following the updated NPPF.
Access, history and Ty unnos.
The world’s first publicly funded civic park.
Exploring permitted development rights for change of use
Discussing lesser known classes M, N, P, PA and L.
CIOB Art of Building 2024 judges choice winner
Once Upon a Pass by Liam Man.
CIOB Art of Building 2024 public choice winner
Fresco School by Roman Robroek.
HE expands finance alliance to boost SME house building
Project follows on from Habiko public-private place making pension partnership for affordable housing delivery.
Licensing construction; looking back to look forward
Voluntary to required contractors (licensing) schemes.
A contractor discusses the Building Safety Act
A brief to the point look at changes that have occurred.
How orchards can influence planning and development.